US Photo Studio 10ft Heavy Duty C Stand Century Stand for Aputure Godox Lights. Zhiyun Smooth 4 3-Axis Handheld Gimbal Stabilizer for Smartphone iPhone Samsung. 3-pack 10' Heavy Duty C Stand Century Stand with Castor Wheels for Aputure Godox. Zhiyun Weebill 3 Combo Camera Gimbal for Nikon Sony Panasonic Canon Fuji BMPCC6K. Zhiyun Weebill 3 Gimbal Stabilizer for Sony Nikon Canon Fuji Olympus Panasonic.Up to 56,000+ lux with the Fresnel 2X. CRI & TLCI scores of 95+. SSI Scores Higher Than The Industry Standard. Tungsten SSI: 85; D55 SSI: 74. Preset Button to Toggle Between Common CCT Presets (2700K, 3200K, 4300K, 5500K, 6500K).
4 Dimming Curves: Linear, Exponential, Logarithmic, & S-Curve. Single Battery (50%) or Dual Battery (100%) Operation. 9 Built-in FX w/ CCT Control: Paparazzi, Strobe, Lightning, Faulty Bulb, TV, Pulsing, Fireworks, Explosion, & Fire. User Presets available via App Control.
Compatible with Sidus Link App & 2.4Ghz Remote. 55° Hyper Reflector for Increased Output All-in-One Silent Control Box. With the Fresnel 2X, the LS 300x can produce over 65,000 lux at 1 meter, creating a stunningly bright light, with CCT control always at your fingertips.
By having the ability to use lensed modifiers like the Fresnel 2X or the Spotlight Mount, in addition to soft light modifiers like the Light Dome II, you can achieve extreme lighting precision to match any shooting environment. The 300x is the first of many Aputure lights to utilize the expanded vari-white CCT range of 2700K-6500K, going beyond traditional bi-colour, allowing you to produce light that is warmer than typical tungsten fixtures, and cooler than conventional daylight (D55). No matter which light engine you use, colour fidelity is always essential, so like all Aputure lights, the 300x sports reliable colour rendering abilities. With CRI and TLCI scores of 96+, a tungsten SSI score of up to 85, and a D55 SSI score of up to 74, the 300x will always provide you with top of the line, accurate colour reproduction.
The 300x also takes a note from the 300d II, by incorporating the same sleek lamp head design and control box design. The 300x utilizes a full 360-degree adjustable handbrake locking yoke. It also matches the 300d II with a completely silent, passively-cooled all-in-one control box, integrating the power supply and control system into a single unit. Quick and precise CCT control. The main difference between the two control boxes is that the 300x now sports a new CCT control wheel, in addition to the intensity wheel.
The 300x CCT dial allows you to fine-tune your CCT in +/- 50K increments. But with the PRESET button located in the middle of the wheel, you can also toggle between 5 common CCT presets (2700K, 3200K, 4300K, 5500K, 6500K) for quick accessibility. The 300x even features two output modes: Max Output and Constant Output mode. In Constant Output mode, you can change your CCT precisely while maintaining a consistent luminance level. In Max Output mode, however, the 300x will always maximize your output for your CCT and dimming level, with the highest output range being 4000K-5500K.Like the 300d II, the 300x can also be operated with a single battery, up to half of its maximum output, or two batteries for full power. The 300x's control box also accurately displays realtime expected remaining battery life, allowing users to always understand and plan for any filmmaking scenario. LS 300X supports controlling lights in multiple control methods, like the control box, 2.4G RF remote, DMX 512, as well as by the Bluetooth Mesh Sidus Link App. With professional DMX512 compatibility, the 300x allows for control through several channels so you can precisely fine-tune your lighting setup. The 300x also launches with 9 built-in lighting FX, such as, "Paparazzi, " "Fireworks, " "Lightning, " "Faulty Bulb, " "TV, " "Pulsing, " "Strobe, " "Explosion, " and "Fire, " all with adjustable colour temperature, opening up new possibilities for precise lighting control on your film sets.
The LS 300X optimizes the internal structure to improves the heat dissipation space, also improves the intelligent temperature control mechanism to ensure continuous and stable light source brightness output. Built-in 2.4G FSK antenna.
What is in the Box? 1 300x lamp body; 1 55° reflector; 1 neutrik power CON cable; 1 CR2032 button cell battery; 1 VA-remote RC1+; 1 quick-release clamp; 1 protection cover;1 cable relief hook; 1 paracord strap; 1 control box; 1 5-pin male-to-female XLR; 1 300x carrying case.The EACHSHOT 10' Century C Stand Kit is a worthy carrier of the time honored C Stand tradition of secure and powerful light and modifier supports for cinema and still studios. The C Stand kit features a 10', two tier spring loaded riser column with a baby pin on top, removable turtle self locking base legs, 2 aluminum 3.0" grip heads and a 40" extension boom arm. The stand base features a specially designed sure locking mechanism that is unique to the C Stand series. Each leg firmly sets to a preset lock position for easy swing setup and then flat for compact storage and transport. Individual legs can be swung to any angle, breaking out of fixed leg stance of classic stands. The'Turtle Base' provides an exceptionally low center of gravity, balancing off axis gear without tipping the assembly, especially when secured with saddlebag style sandbags.
The unique staggered curved leg design allows C Stands to be nested allowing for several to be used in close proximity. The lower leg can also be slid under many objects. The kit's extension gobo rod arm precisely slips into the aluminum 3.0 grip heads, supporting light modifiers, arms, scrims, cantilever flags, gobos or smaller lights, into exact position. The 5/8 diameter arm and Grip/Gobo/KnuckleHead combination can be used as a short boom, is tremendously helpful on still life sets, supporting everything from reflectors to soup spoons in clamps.
The cast aluminum head design has interlocking facing surfaces to keep a fixed position when supporting accessories on the steel arm in one of its four 3/4", 5/8", 3/8", and 1/8" diameter channels. The jaws open to a maximum of 1-1/8 to hold rods, dowels and studs.The channel disks pivot about the center tightening handle and is grooved to friction hold firmly. When used atop light stands, it attaches via a 5/8" baby pin receiver hole with a choice of two places on the length for the tightening grip handle, taking best advantage of shorter studs on standard light stands or the included 5.5" longer baby pin ends on Century Stands. Altogether, the C Stand stands alone in the wish list of absolute'must-haves' for your studio. Qliq Qwip The name'Century Stand' goes back to the days of motion picture production. There were no artificial light sources. No large tungsten lamps and certainly not quartz bulbs to illuminate. Just light from the sun. The film sets would revolve on platforms to assure a constant light from the sun above. Carefully positioned giant reflectors would be strategically placed to deflect the sunlight up onto the stages and thereby illuminate the scene and actors. While the reflectors were made in many sizes and shapes, the most popular was the 100 inch, or'century', sized reflector. Stage assistant then created tools to aid them in the support of these 100 reflectors and invented what we now call C Stands. The first C Stands could not adjust or swivel, but they easily nested together just as they do today. Time tested and proven as an invaluable stage property, today's Century Stands, or C Stands, are an essential element in the image maker's inventory of tools.
FEATURES Legs swing lock into preset and custom positions Durable chrome finished steel withstands harsh conditions. Spring loaded buffer on each riser section with rubber gaskets Stagger height'Turtle Legs' allow for close nesting stands Two Aluminum Gobo/Grip/Knuckle Heads with 4 channels for total dexterity Sure locking legs fold flat for storage and transport Baby Pin stud for angular mounts. Specifications: Minimum Height: 53" (134 cm) Maximum Height: 10.8' (330 cm) Arm Length: 106 cm / 42 inches Closed Length: 47" (119 cm) Footprint Diameter: 34" (86 cm) average radius Maximum Load: 30 lbs (13.6 kg) as a stand Leg Heights: 7" / 9" /10.5" Attachment Size: 2.75" 5/8"diam (16 mm) male'baby pin' stud Base Insert Diameter: 1-3/16 Wheels: No Weight Kit: 18.25 lbs (8.3 kg) Stand alone: 14.75 lb (6.7 kg) Arm: 1 lb 3.5 oz (0.55 kg) Grip/Knuckle Head, each: 1 lb 2 oz. 51 kg Baby Pin Stud: 6.6 oz (186g) Materials Stand and Arm: Stainless Steel with Chrome Finish Grips: Cast Aluminum.
Package Including: 1 x Center Stand (Turtle Base + Main Central Column) 1 x 106cm Boom Arm 2 x Grip Head. Equipped with double threaded ports, 1/4 and 3/8 threaded ports.It can be directly connected to photographic equipment such as flash, camera, gimbal, etc, with a wide range of use. 3 legs open and close, the center of gravity stable support strong. Good load bearing and seismic performance. Uniform firmness, in line with equipment requirements. Separable three-legged design for quick folding. Flexible for a variety of scenarios. The 4 different size holes design of the round handle clamp makes it easier to lock the holding arm and other accessories. It is suitable for connecting more size holding arm and accessories, and the operation is simple. High-quality sponge handle, comfortable hand feeling, and beautiful design. It can also play a non-slip effect when you move.
ECheque will be held until cleared. We will not be responsible for item loss because of wrong or undeliverable address. All items are located in the United States.
There are one year warrenty for all the items. If you received the item with defective or faulty, we will responsible for it once we confirmed the problem. For small items, we can replace it for you directly once we received the picture about defective. If you used it for several months and found it is defective, you can return it to repair. If you return directly without contacting us, it maybe return to you, we will not responsible for that.
Support For any questions Please feel free to cotnact us. Our office hour: -9:00a.
(GMT+8) of Monday to Friday -And our company is closed on Weekend and Public Holiday (China) We apologize for the late reply during the holidays! But hope that our customers give us their understanding. You will find many excellent and affordable items here!This item is in the category "Cameras & Photo\Camera, Drone & Photo Accessories\Camera & Camcorder Lights". The seller is "ask-photo" and is located in this country: US.
This item can be shipped to United States.